Skip to main content

CrelioHealth For Diagnostics

Laboratory Order Management: From Test Requisition to Accessioning

The lab order problems that land on your bench often start at intake: a smudged fax, a test code that won’t get paid, or a collection time nobody wrote down. Here’s how to
Laboratory Order Management

Table of Contents

TL;DR

Test order problems that surface at the bench usually start at intake, and that’s where laboratory order management earns its keep. Orders reach your lab through different channels: EHR interfaces, a provider portal, paper or fax, and patient self-booking. Each needs the same checks before acceptance: a test code that’s on your menu, the CLIA requisition elements, a diagnosis that supports medical necessity, and the complete billing data. Show clients where each order stands, and send the bench only complete orders.

  • The four intake channels and where each one breaks
  • Five checks to run before you accept an order
  • How referring clients see order status without calling
  • What has to be true before an order moves into accessioning

A referring clinic rings labs asking whether yesterday’s order arrived. The person answering has to check the portal, the fax tray, and a shared inbox before giving a real answer, and by the time they do, the clinic has already called twice more. This is not a one-off. It is what happens in a diagnostic lab where order management was never designed as a single chain, only assembled from whatever channel happened to work at the time.

Scale that one call across a busy week and the real cost comes into view. Client services spends hours chasing answers that should already be visible somewhere, order entry re-keys the same details more than once because nobody owns the master record, and the receiving bench inherits whatever gaps slipped through earlier. None of this shows up as a single dramatic failure. It shows up as a slow accumulation of small delays that nobody traces back to its actual source, because the source is rarely one broken step. It is usually four or five channels pulling in different directions with no shared thread tying them together.

What follows lays that chain out clearly: where orders come from, what a lab checks before accepting one, how a client sees status without calling, and what a clean handoff into accessioning requires before the sample ever reaches the bench.

What Laboratory Order Management Actually Covers

Laboratory order management starts the moment a referring clinician or a patient requests a test and ends the moment the sample is accessioned. Everything between those two points- receiving the request, validating it, tracking where it sits, and handing it cleanly to the receiving bench- is what the term covers. It is not the test itself, and it is not the result. It is the administrative spine that decides whether the test and the result are even trustworthy.

Four groups touch this chain at different points:

  1. The referring clinician or patient, who starts the request
  2. Client services, who field questions and chase missing details
  3. The lab manager, who owns the process end to end
  4. The receiving bench, who inherits whatever the hand-off leaves them with

A lab electronic order and workflow system exists to connect these four groups around one record rather than four separate ones, which is the single biggest difference between a lab that answers a status call in seconds and one that puts the clinic on hold.

Four Ways Lab Orders Reach Your Lab, and Where Each One Breaks

Any lab running finances out of spreadsheets hits the same tipping point eventually. It arrives the moment reconciliation starts taking longer than the billing cycle itself. Once that happens, the spreadsheet stops being a safety net. It becomes the bottleneck.

Channel Where it usually breaks The check that catches it
EHR and HL7 interface A test code still maps to a retired or renamed test after either system updates Match every inbound code against your current compendium
Provider portal Free-text tests, unsigned orders, and unanswered AOE questions Required fields and e-signature before the order can be submitted
Paper and fax Handwriting, smudged codes, missed tick boxes, and typos at re-keying Compare keyed fields against the scanned image before release
Patient self-booking No authorized requester, or the wrong panel picked Confirm who ordered the test before collection

EHR and HL7 interfaces

Electronic orders sent directly from a referring clinic’s own system arrive with the least manual handling and the fewest transcription errors, provided the interface itself is configured correctly and stays that way as both systems update. Interface mapping between a client’s EHR and a lab’s own system is its own specialist job, not something to improvise mid-rollout.

Provider portal entry

A portal gives you a structured, signed order without a fax machine in the middle. A referring provider logs into a portal and enters or uploads the order directly, which removes the paper step entirely while still giving the lab a structured, reviewable record. The portal experience itself, including how it handles order history and result delivery, is a product decision rather than a workflow one.

Paper and fax requisitions

Paper and fax persists because plenty of referring clinics aren’t ready to go electronic. The cost shows up at re-keying: every handwritten form is a chance for a transcription error that a scanned or typed order never had. A smudged test code, a missed tick box, or a signature that covers half the patient details can all turn a five-minute data entry task into a ten-minute phone call back to the clinic. 

The paper requisition itself, what a test requisition form actually needs to contain and why clinics still fax them in the first place, is worth a closer read if this is the channel giving your team the most grief, covered in full in our guide to the test requisition form. Labs reducing this manual load typically do it with AI-assisted requisition scanning rather than by hiring more data-entry staff, which is worth a separate look once the order channel itself is sorted.

Patient self-booking

Patients booking their own tests directly, without a referring clinician in the loop, is a growing fourth channel, particularly for routine or wellness testing. The order validation rules below still apply in full. A self-booked order is not a lower-scrutiny order just because a patient entered it themselves.

CLIA still requires a request from an authorized person, and federal rules leave it to state law to decide who that is. Confirm your state allows direct access testing before a self-booked order goes to collection.

Order Validation: What a Lab Should Check Before Accepting an Order

An order that passes straight through to accessioning without being checked is a problem waiting to surface downstream, usually at the worst possible moment: during billing, during a redraw request, or during a client call asking why a result never arrived. Four checks catch nearly everything before that happens.

  1. Test codes against the compendium: The requested test has to match something on the lab’s own menu. A retired code, an unknown code, or a duplicate order against one already logged all need resolving before the order moves forward.
  2. The diagnosis on the order: Why a diagnosis matters for billing depends heavily on the market and the payer involved, so this is a line to confirm with a billing or regulatory reviewer rather than one to write from general knowledge.
  3. Insurance and billing details: Whatever has to be on an order before it can be billed needs to be there before accessioning, not discovered afterward when a claim bounces back unpaid.
  4. Completeness of the order itself: Missing information has to be tracked back to the requesting clinician by someone specific, rather than sitting in a queue nobody owns. Questions asked at order entry are their own separate discipline with their own management process, worth a quick mention here and a proper look elsewhere rather than a full section in this guide.

A simple scoring approach works well across all four: green when the check passes clean, amber when something needs a follow-up call, red when the order cannot proceed until it is fixed. Treat any red in test codes or billing information as a stop, not a note to revisit after accessioning.

Check What it confirms Who typically owns it
Test codes The requested test exists on the lab's current menu, with no duplicate or retired code attached Client services or order entry team
Diagnosis on the order The clinical reason for testing is present and consistent with the test requested Order entry, reviewed against local billing rules
Insurance and billing information Everything a claim needs is captured before the sample is accessioned, not after Billing or client services
Completeness of the order No required field is missing, and any gap is tracked back to a named clinician Client services, with a clear escalation owner

This table doubles as a checklist for anyone handling order intake. The four rows, in this order, are the ones worth running every single order through before it ever reaches the receiving bench.

How Do Clients Track the Status of a Lab Order?

A client expects to see an order move through five recognisable stages: received, accepted, collected, in progress, and resulted. When those stages are visible somewhere the client can check on their own, the phone stops ringing nearly as often, because the question that used to require a call now has an answer the client can find themselves.

Status visibility usually lives in three places at once:

  1. The provider portal, where a referring clinic can look up any order by name, date, or reference number
  2. Notifications, pushed to the clinic or the patient at each stage change rather than only at the very end
  3. The interface back into the referring clinic’s own EHR, so status appears inside the system the clinic already lives in.

None of these three has to work perfectly to help. Even partial visibility, say, a portal that shows received and resulted but nothing in between, cuts down meaningfully on the calls that start with “just checking on an order from Tuesday.

The Hand-Off Into Accessioning

Everything in order management exists to produce one clean moment: the hand-off into accessioning, where a validated order meets a physical sample and the two become one trackable record. Five things have to be true at that moment for the hand-off to count as clean.

 

  1. The order has passed validation, with no outstanding red flag from the checks above.
  2. Patient identity is confirmed against the order, not assumed from the label alone.
  3. The requested tests are mapped correctly to what the receiving bench will actually run.
  4. Collection details, the type of sample, the time of collection, and the collecting site, are all present.
  5. Any exception has been flagged rather than quietly passed through.

When an exception does turn up at this exact point, a lab generally has three options: hold the sample until the gap is closed, query the referring clinician directly, or reject the order outright and ask for a fresh one. Which option fits depends on how serious the gap is and how fast the result is needed, not on a fixed rule that applies every time.

An urgent cardiac marker with a missing collection time calls for an immediate query back to the clinic rather than a hold that risks the result arriving too late to matter. A routine wellness panel with the same gap can usually sit on hold for a few hours without consequence. Treating every exception the same way, either holding everything or rejecting everything, is how labs end up either too slow for urgent work or too loose with routine work, and neither trade-off serves the patient waiting on the other end of the result.


This is also exactly where order management stops, and accessioning begins. What happens to the sample once it physically arrives- logging, numbering, and routing to the right bench- is a separate process with its own specifics, covered in full in our guide to what sample accessioning actually involves.

What Should a Lab Order Management System Actually Do?

Strip away the vendor language, and a genuinely useful order management system does five things, in plain terms, regardless of which platform delivers them:

  1. Accept orders from every channel a lab actually uses, not just the one that was easiest to build first
  2. Validate each order at the point of entry, rather than letting a problem surface downstream
  3. Show order status to clients directly, without requiring a phone call to client services
  4. Flag exceptions clearly, with a named owner for resolving each one
  5. Pass a clean, fully validated order into accessioning every single time

CrelioHealth’s order management tools are built around exactly this checklist: pulling orders in from EHR interfaces, a provider portal, and direct upload, validating them at entry, and surfacing status to referring clients without routing every question through a phone call. For labs still re-keying paper and fax requisitions by hand, AI-assisted requisition handling and automated form scanning both target the exact re-keying cost described above, turning a manual bottleneck into a validated order in a fraction of the time.


If your lab wants to see how this maps against your own order channels, a short walkthrough against your actual workflow tends to surface more than a feature list ever could, and an AiReq trial is the fastest way to see the requisition side of this in action on your own forms.

Frequently Asked Questions

What is laboratory order management, in plain terms?

It is how a lab receives, validates, tracks, and hands off a test order, starting from the referring clinician’s or patient’s request and ending when the sample is accessioned. It is the administrative chain that makes the test and the result trustworthy.

Majorly through four channels: EHR and HL7 interfaces direct from a client’s own system, a provider portal where clinicians enter or upload orders, paper and fax requisitions re-keyed by staff, and patients booking tests themselves. Most labs run all four at once.

Four things to check before accepting a lab test order are: the test code against the lab’s own menu, the diagnosis stated on the order, the insurance and billing details required to submit a claim, and whether any required field is missing and needs follow-up with the clinician.

Through an outreach or provider portal showing received, accepted, collected, in progress, and resulted stages, through notifications pushed at each stage change, or through an interface feeding status straight back into the client’s own EHR, so no phone call is needed.

Order entry covers receiving and validating the request itself, before any physical sample arrives. Accessioning begins once the physical sample reaches the lab, when it is logged, numbered, and routed to the correct testing department.

Someone specific has to contact the referring clinician and track the gap until it closes, rather than letting it sit in an unowned queue. Any order with missing required fields should stay on hold until that information actually arrives.

Conclusion

Order management is a chain of four stages: receive, validate, track, hand off, and most delays trace back to the first two rather than anything that happens later. Pick one week of recent orders and walk each one through those four stages by hand. The point where most of them stall is usually obvious within an hour, and it is almost always the place worth fixing first. See how CrelioHealth’s order management maps against what you find, or start an AiReq trial to see the requisition side of it on your own forms.

Related Posts

The Satyam Pathology Story: From Paper Registers to Cloud LIMS
Dr. Sangita Joag Shares About Her Incredible Journey with 25 Years of Patient Care and Over a Decade...
Lab Claim Denials by Test Category and Payer: Why Tox, PGx and Molecular Claims Get Denied or Underpaid and What to Fix Before the Claim Leaves
Understand why toxicology, PGx, and molecular lab claims get denied or underpaid across different payer...
Hospital Outreach Labs: The Software Requirements That Standalone LIMS Vendors Miss
Hospital outreach laboratories serve physicians, clinics and external healthcare providers beyond a hospital's...